Chimney & Air Duct · Morrisville, NC
Chimney Repair in Morrisville, NC
Chimney repair covers the parts of the chimney that keep water out and hold the structure together: the crown, cap, flashing, mortar joints and brick. Small failures in any of these let water in, and water sits behind most of the chimney damage we see.
4.9 stars on Google, 76 reviews
What it covers
- Crown repair and rebuilding
- Cap and spark screen replacement
- Flashing repair where the chimney meets the roof
- Tuckpointing and mortar joint repair
- Brick replacement on spalled or flaking faces
- Sealing to keep water out of the masonry
Signs you need it
- Crumbling or missing mortar between the bricks
- A cracked, flaking or uneven crown
- Rust or water stains around the flashing
- Bricks that are spalling or flaking
- Water in the firebox after heavy rain
How the work is done
- 1
We find the source
We look at the crown, cap, flashing and mortar to work out where the water is actually getting in.
- 2
We explain the options
You hear what needs fixing now, what can wait, and roughly what each choice involves.
- 3
We do the repair
Depending on the job that means rebuilding a crown, resetting flashing, repointing joints or replacing brick.
- 4
We check the seal
We confirm water will run off rather than in, and tell you what to watch for over the next season.
Before we arrive
A few small things make the visit go more smoothly and keep the work area tidy.
- Clear the floor in front of the fireplace, or the space around the registers and the dryer, so we have room to work.
- Move pets to a quiet room before we start, since the vacuum and the roof access can be unsettling for them.
- Let us know where to park and whether there is anything unusual about the roof or attic access.
Why it matters in the Triangle
Chimneys here take a lot of rain. A humid summer followed by a wet fall is enough to work on a crown that already has a hairline crack, and once water is inside the masonry it does not leave quickly. That trapped moisture is what drives spalling brick and crumbling mortar, and it is why water damage tends to show up in a different place than where it started.
Repairing the water path early is usually the smaller job. A crown that is sealed when the crack is thin is a much shorter visit than a crown that has been letting water in for several seasons and has taken the top of the chimney with it.
Common questions
How do I know if my chimney needs repair?
Crumbling mortar, a cracked crown, rusted flashing, flaking brick or water in the firebox are the usual signs. An inspection will confirm which one you have.
Can you match the existing brick?
In most cases we can get close. On older brick the match is rarely exact, and we will tell you that up front rather than after the work.
How long does a repair take?
A small repair can be a single visit. A crown rebuild or brick replacement can take longer, and we will give you a realistic idea beforehand.
Do I need to stop using the fireplace?
If the repair touches the flue or the firebox we will tell you what is safe in the meantime.
Should I repair or rebuild?
That depends on how much of the structure is affected. We will show you what we see and explain both paths.
Book this service
Tell us your address and what you need, or call and we will find a time.
Call (984) 306-0086Serving Morrisville, NC and the surrounding Triangle towns.
Sunday–Friday 8 AM–5 PM, Saturday 9 AM–5 PM
Request an estimate for your home
Call or send the form and we will follow up with a time.