Chimney & Air Duct · Morrisville, NC

Creosote Removal in Morrisville, NC

Creosote is the tar-like residue left behind when wood burns. It builds up on the inside of the flue in layers, and thick or glazed creosote is the part that catches fire. We identify which stage you have and remove it in Morrisville and the surrounding towns.

4.9 stars on Google, 76 reviews
Inside of a chimney flue seen from above

What it covers

  • Stage 1: light, flaky soot that brushes away
  • Stage 2: sticky, tar-like deposits that need a rotary brush
  • Stage 3: glazed, hard deposits that need treatment first
  • The flue walls from the smoke shelf up to the cap
  • The damper and smoke shelf where residue collects
  • A camera look at the flue once the work is done

Signs you need it

  • A flaky black crust inside the flue
  • A tar-like or shiny coating on the flue walls
  • A strong smoky smell even with no fire burning
  • The fire does not draw well
  • You burn a lot of wood through the season

How the work is done

  1. 1

    We identify the stage

    We look up the flue and, where needed, run a camera so we know whether we are dealing with soot, tar or glaze.

  2. 2

    We treat what needs treating

    Glazed creosote is hard and stuck to the liner, so a chemical treatment goes on first to soften it.

  3. 3

    We brush it out

    Rotary brushes work the flue walls until the softened deposits come away and drop to the smoke shelf.

  4. 4

    We check the result

    We look again with the camera and show you the difference before we pack up.

Before we arrive

A few small things make the visit go more smoothly and keep the work area tidy.

  • Clear the floor in front of the fireplace, or the space around the registers and the dryer, so we have room to work.
  • Move pets to a quiet room before we start, since the vacuum and the roof access can be unsettling for them.
  • Let us know where to park and whether there is anything unusual about the roof or attic access.

Why it matters in the Triangle

How much creosote forms depends more on how you burn than on how often. A fire that runs cool and smoky, with the damper partly closed, leaves far more residue than a hot fire with a good draft. Unseasoned wood adds moisture, and moisture is what turns ordinary soot into the sticky second stage.

That is why two homes on the same street can be very different inside the flue. If you burn a lot of wood or you know your wood has not had a full season to dry, it is worth having the flue looked at rather than assuming a yearly sweep is enough.

Common questions

What are the stages of creosote?

Stage 1 is light flaky soot. Stage 2 is thicker and tar-like and needs a rotary brush. Stage 3 is glazed and hard and has to be softened with a chemical treatment before it can be removed.

Is glazed creosote dangerous?

Stage 3 creosote is the most flammable form, which is why it is treated as the priority when we find it.

Can Stage 3 be removed in one visit?

Sometimes. Heavy glaze can need more than one treatment because the chemical has to work through the layers.

Does a regular sweep remove all creosote?

A sweep removes soot and light deposits. Tar and glaze need different tools.

How do I slow creosote build-up?

Burn dry, seasoned wood, keep the damper open enough for a good draft, and avoid long smoldering fires.

Book this service

Tell us your address and what you need, or call and we will find a time.

Call (984) 306-0086

Serving Morrisville, NC and the surrounding Triangle towns.

Sunday–Friday 8 AM–5 PM, Saturday 9 AM–5 PM

Request an estimate for your home

Call or send the form and we will follow up with a time.

Call (984) 306-0086