November 13, 2026

Level 1 vs Level 2 chimney inspections

A Level 1 inspection is a visual check of the parts of the chimney you can reach without tools. A Level 2 adds a camera scan of the flue and a look at the attic and basement connections, and it is the usual choice when a home changes hands.

Chimney crown and flue tile checked during a chimney inspection

What a Level 1 covers

A Level 1 is the check that goes with a normal year of use. The firebox, damper, smoke shelf and the accessible parts of the flue are examined, and the exterior is looked at from the roof or the ground: the crown, the cap, the flashing and the brick or siding around the chimney.

It is a visual inspection, so it works on what can be seen without opening anything up. On a chimney that has been swept on a schedule and has no history of trouble, a Level 1 answers the question most homeowners are asking: is this in usable condition right now.

What a Level 2 adds

A Level 2 starts with everything a Level 1 covers and adds a camera run the length of the flue. The camera shows the liner from the inside: cracks, gaps between tiles, heavy deposit in a section the eye cannot reach, or a flue that has come apart somewhere in the middle of the run.

It also reaches the parts of the system that are hidden in the house. Attic and basement connections are checked, because that is where a flue passes through framing or where a joint has pulled apart. Those areas are invisible from the hearth and easy to miss without opening a panel.

When a Level 2 is the right call

A change of ownership is the common one. A buyer wants to know what they are taking on, and a camera scan gives a much clearer answer than a look up the flue with a flashlight. The same applies after a chimney fire, an earthquake or a storm that brought something down on the roof.

It is also worth asking for when the chimney has not been looked at in a long time, when you are adding an insert or changing fuel, or when water has been getting into the masonry. In each of those cases the question is not just what the chimney looks like but what condition the liner is in.

What the report should tell you

A useful report says what was looked at, what was found and what it means. It separates the things that need attention now from the things worth watching, and it does not leave you guessing which category a note belongs to.

Ask to see the camera images if a Level 2 was done. A photograph of a cracked tile is worth more than a sentence about one, and it gives you something to compare against at the next inspection.

Inspection before a home sale

In a sale, timing matters as much as the inspection itself. A Level 2 done before the house goes on the market gives a seller time to deal with anything that comes up rather than negotiating over it later, and it gives a buyer a document to read instead of a verbal summary.

Either side can order it. What matters is that the report is specific enough to act on and recent enough to describe the chimney as it is now, not as it was a few seasons ago.

What an inspection does not include

An inspection is not a sweep. The camera sees a dirty flue clearly, but the deposit stays where it is until the flue is cleaned. If the inspection finds heavy creosote, the sweep is a separate visit, and sometimes it has to happen before the camera work is worth much.

Repairs are separate too. An inspection can tell you that a crown is cracked or that flashing has pulled away, and it can explain the options, but the repair is its own piece of work with its own plan.

Choosing between the two

If nothing has changed and the fireplace has been swept on a schedule, a Level 1 answers the question. If the chimney is new to you, if it has been through a fire or a storm, if water has been getting into the masonry, or if the appliance is being changed, the camera work in a Level 2 is what turns a guess into an answer.

It is also reasonable to ask for a Level 2 when an earlier report was vague. A second look with a camera is a small thing next to repairing a liner that was already failing when the first report was written, and it gives you images to hold on to.

Common questions

How long does each inspection take?

A Level 1 is usually about an hour. A Level 2 takes longer because of the camera run and the attic and basement checks.

Do I need an inspection before selling my home?

It is often requested during a sale, and a Level 2 is the usual choice when a property changes hands.

Does the inspection include a sweep?

No. A sweep is separate work. If the flue needs one, we tell you and you decide what happens next.

Request an Estimate

Tell us what you are seeing and we will follow up with a time. We are open Sunday through Friday 8 AM to 5 PM and Saturday 9 AM to 5 PM.

Request an estimate for your home

Call or send the form and we will follow up with a time.

Call (984) 306-0086